Notes

Slide Show

Outline

1	CTD Traction Winch System And Motion Compensated Crane
2	"The CTD / Cable Issue" The CTD / Cable Issue The DYNACON Solution The Traction Winch Concept And Application Advantages Of Traction Winches vs. Conventional Drum Winches Early Traction Winch Configurations
3	"DYNACON Traction Winch" DYNACON Traction Winch Advancements Design Safety Maintenance
4	"The DYNACON Traction Winch In..." The DYNACON Traction Winch In CTD And Oceanographic Applications Integration Of The CTD Traction Winch And Motion Compensated Crane Economic Justification
5	The Issue Data Inversion Higher Loads On Traditional Cables Higher Line Speeds To Minimize Time At Sea
6	The Issue
7	The DYNACON Solution Motion Compensated CTD Handling System
8	The DYNACON Solution
9	Concept
10	The Traction Winch- When To Consider Cable Breaking Strength @ 25-50% Of Line Load High Sea States Frequent Changes In Ship Speeds
11	The Traction Winch- When To Consider Cable Length And Resulting Weight In Sea Water Storage Properties Of Cable Under High Tension Duty Cycle
12	Advantages Over Conventional Drum Winches
13	Advantages Over Conventional Drum Winches
14	Early Traction Winch Designs Traction sheaves were not cantilevered
15	Early Traction Winch Designs Non-Canted Sheaves Single Drives Small Diameter, Vertical Guide Rollers
16	DYNACON Design Advancements Cantilevered Sheaves
17	DYNACON Design Advancements Canted Sheaves
18	DYNACON Design Advancements Independent Drives
19	DYNACON Design Advancements Right-Angle Levelwind Eliminates The Need For Small Diameter Guide Rollers
20
21	Safety 12 VDC Control Voltage Spring Center-to-Neutral Control Joysticks Spring Applied, Hydraulically-Released Failsafe Brakes HPU Stop Pushbuttons on Control Enclosures
22	Safety Control Systems Interlock Automatic Mode for Single Joystick Operation-Proof of Tension Must be Present Enable Remote Station Only From Local and Only If In Automatic Mode Local Control Joysticks Override Remote Station
23	Maintenance
24	CTD Traction Winch System Safe Working Loads From 1,800 Kg To 4,500 Kg Line Speeds Up To 1.5 m/s (90 mpm) Storage Winch Drum Capacities Up To 11,000 Meters
25	Nodding Boom Crane Minimum Compensated Load 270 Kg Maximum Compensated Load Up To 4,500 Kg Compensation Range + 2.5 Meters Slewing Range 200 Degrees
26	Nodding Boom Crane “Passive” Heave Compensation Responds To Changes In Line Tension Oil / Gas Accumulator And Crane Boom Cylinders
27	The Next Generation: System Integration
28	Flexible Deck Layouts
29	Flexible Deck Layouts
30	Flexible Deck Layouts
31	Flexible Deck Layouts
32	Flexible Deck Layouts
33	Flexible Deck Layouts
34	Economic Justification CTD Cast Time Reduced by 30% Vessel Operating Costs $20,000-$40,000 Per Day Cost of CTD Unit, 24 Bottle Carousel and 6000 Meters of 8.18 mm (0.322 in.) Diameter Cable $150,000